Accessories: All Accessories
 |
|
| IOMAX Breakout Module |
|
| Item No. | IOMAX |
The IOMAX will connect to the MAXp series of motion controllers via our 120-pin cable. IOMAX contains screw terminals for easy custom wiring and is equipped with over current circuitry on the supply voltage. The IOMAX is compatible with the MAXp family of motion controllers. |
|
 |
|
| IO38 Breakout Module |
|
| Item No. | IO38 |
The IO38 will connect to any Oregon Micro Systems PC48 motion controller via our 80-pin cables - simplifying system prototyping and integration. |
|
 |
|
| IO68 Breakout Module |
|
| Item No. | IO68 |
The IO68 connects directly to the PC78 & PC68 via a 68-pin, standard, SCSI-3 cable which will keep costs at a minimum. It is available in 2 versions: the IO68-M for use as a standard breakout module with any PC78, PC68 or PCIx; and the IO68-I for use as an IO signal breakout module when used with a Px6IO PC68 Series expansion module. |
|
 |
|
| IO58 Breakout Module |
|
| Item No. | IO58 |
 |
|
| IOMAXnet Breakout Module |
|
| Item No. | IOMAXnet |
The IOMAXnet will connect to the MAXnet series of motion controllers via our 120-pin cable. IOMAXnet contains screw terminals for easy custom wiring and is equipped with over current circuitry on the supply voltage. The IOMAXnet is compatible with the MAXnet family of motion controllers. |
|
 |
|
| IOvMAX Breakout Module |
|
| Item No. | IOvMAX |
The IOvMAX will connect to the MAXv series of motion controllers via our 68-pin cables and 50-pin cables. IOvMAX contains screw terminals for easy custom wiring and is equipped with over current circuitry on the supply voltage. |
|
 |
|
| CBL58-3M - 100 pin Shielded Signal Cable |
|
| Item No. | CBL58-3M |
The CBL58-3M is available for use with an Oregon Micro Systems PC58 or VME58 motion controller, and is fully shielded and jacketed. |
|
 |
|
| CBL25-10 - 25 pin Shielded Cable |
|
| Item No. | CBL25-10 |
I/O Cable for IOMAX 10 foot, 25-pin |
|
 |
|
| CBL38-12 - 80 pin Shielded Signal Cable |
|
| Item No. | CBL38-12 |
 |
|
| CBL50-10 - 50 pin Shielded Signal Cable |
|
| Item No. | CBL50-10 |
The CBL50-10 is available for use with an Oregon Micro Systems MAXv motion controller, and is fully shielded and jacketed. Comes in 10 foot lengths
|
|
 |
|
| CBL68-10 - 68 pin Shielded Signal Cable |
|
| Item No. | |
The CBL68 is available for use with an Oregon Micro Systems PC78, PC68, MAXv, and PCIx motion controller, and is fully shielded and jacketed. |
|
 |
|
| CON38 Connector Kit |
|
| Item No. | CON38 |
In applications that do not require complete cables or use a motion controller for which no special cable is available or needed, OMS supplies a number of connector kits to enable the construction of custom cabling. Kits are available for virtually all of OMS past and current products. |
|
 |
|
| CON58 Connector Kit |
|
| Item No. | CON58 |
In applications that do not require complete cables or use a motion controller for which no special cable is available or needed, OMS supplies a number of connector kits to enable the construction of custom cabling. Kits are available for virtually all of OMS past and current products. |
|
 |
|
| CON68 Connector Kit |
|
| Item No. | CON68 |
In applications that do not require complete cables or use a motion controller for which no special cable is available or needed, OMS supplies a number of connector kits to enable the construction of custom cabling. Kits are available for virtually all of OMS past and current products. |
|
 |
|
| CONPCX Connector Kit |
|
| Item No. | CONPCX |
In applications that do not require complete cables or use a motion controller for which no special cable is available or needed, we supply a number of connector kits to enable the construction of custom cabling. Kits are available for virtually all of our past and current products. |
|